PVC C900/C905

ISO 9001:2000 Registered

PVC PRESSURE PIPE
AWWA Standard C-900
Water Distribution Pipe

Northern Pipe Products PVC AWWA C-900 PVC Pressure Pipe is manufactured from compounds conforming to PVC cell classification of 12454B as defined in ASTM D-1784. The pipe meets the requirements of the AWWA C-900 standard specification for polyvinyl chloride water distribution pipe. The integral bell joint system meets the requirements of ASTM D-3139 and utilizes an elastomeric seal conforming to ASTM F-477. Northern Pipe Products AWWA C-900 Pressure Pipe for potable water carries the NSF Standard 61, the Canadian Standards Association Standard B137.3, the Underwriters Laboratories Inc Standard 1285, the Underwriters Laboratories of Canada Standard ULC/ORD-C1285, and the Factory Mutual Research Water Distribution Pipe for Underground Fire Protection Service marks of acceptance. The pipe is furnished in 20-foot laying lengths. The spigot ends are beveled and insertion depths are marked for correct installation.

AWWA C-900 Potable Water Pipe

Nominal Pipe Size Inches

Pipe O.D. Inches

DR-25

DR-18

DR-14

Min.
Wall Inches

Weight Lbs./Ft.

Min. Wall Inches

Weight Lbs./Ft.

Min. Wall Inches

Weight Lbs./Ft.

4

4.800

.192

1.87

.267

2.55

.343

3.22

6

6.900

.276

3.90

.383

5.29

.493

6.70

8

9.050

.362

6.69

.503

9.15

.646

11.55

10

11.100

.444

10.11

.617

13.82

.793

17.46

12

13.200

.528

14.32

.733

19.56

.943

24.75

PVC PRESSURE PIPE
AWWA Standard C-905
Water Transmission Pipe

Northern Pipe Products PVC AWWA C-905 PVC Water Transmission Pipe is manufactured from compounds conforming to cell classification of 12454B as defined in ASTM D-1784. The pipe meets the requirements of the AWWA C-905 standard specification for polyvinyl chloride water transmission pipe. The integral bell joint system meets the requirements of ASTM D-3139 and utilizes an elastomeric seal conforming to ASTM F-477. Northern Pipe Products AWWA C-905 Pressure Pipe for potable water carries the NSF Standard 61, the Canadian Standards Association Standard B137.3, the Underwriters Laboratories Inc Standard 1285, the Underwriters Laboratories of Canada Standard ULC/ORD-C1285, and the Factory Mutual Research Water Distribution Pipe for Underground Fire Protection Service marks of acceptance. The pipe is furnished in 20-foot laying lengths. The spigot ends are beveled and insertion depths are marked for correct installation.

AWWA C-905

		DR-25 (165 PSI)		DR-18 (235 PSI)
Nominal Pipe Size Inches	Pipe O.D. Inches	Min. Wall Inches	Weight Lbs./Ft.	Min. Wall Inches	Weight Lbs./Ft.
14	15.3	.612	19.35	.850	26.5
16	17.4	.696	25.20	.967	34.5
18	19.5	.780	31.3	1.083	43.4
20	21.3	.864	39.0	1.200	53.5
24	25.8	1.032	56.0	1.433	76.5